Chlorapatite Derived From Fish Scales.

The present work demonstrates the production of chlorapatite (ClAp) through thermal decomposition of chemically treated fish scales, originating from an Amazon fish species (Arapaima gigas). The scales were treated with hydrochloric acid (HCl) solution for deproteinization. Afterwards, the solution was neutralized by sodium hydroxide (NaOH) treatment to obtain an apatite-rich slurry. The heat treatment was carried out at different temperatures including 600 °C, 800 °C, and 1000 °C. The powders obtained were characterized through X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM). The XRD analysis and FTIR spectra confirmed the incorporation of chlorine into the apatite structure. The FTIR results showed absorption bands relative to the OH-, PO43- functional groups which are a characteristic of chlorapatite; moreover, the intensity of the OH-Cl elongation could be observed. Chlorapatite Ca5(PO4)3Cl, NaCl, and NaCaPO4 phases were identified, achieving up to 87.4 wt% for ClAp. From the SEM observations, the ClAp obtained consisted of slightly larger grains and more crystalline with increasing temperature with observed grains ranging in sizes between 1 and 5 µm and 84.27% crystallinity for the ClAp1000 sample. The ClAp and NaCaPO4 can be used in electronics as a phosphor material due to the fact of its luminescence and biomedical applications.

Investigating the Fluid-Solid Interaction of Acid Nonionic Nanoemulsion with Carbonate Porous Media.

The subject of rock-fluid interaction is important in cases where flow through porous media is occurring. One special case is when the fluid reacts with the porous matrix. In this case, the mass transfer and reaction rate control the dissolution pattern. This article aimed to study the interaction between an acid nanoemulsion system and a carbonate porous media. Nanoemulsions were developed to retard the rock's dissolution and to promote the formation of conductivity channels. Nanoemulsions were prepared using ALK100 (alkyl alcohol ethoxylate) and RNX110 (alkylphenol ethoxylate) (nonionic surfactants), sec-butanol (co-surfactant), xylene isomers (oil phase), and a solution of HCl (aqueous phase). The obtained systems were characterized in terms of surface tension, droplet diameter, and reactivity. X-ray fluorescence/diffraction (XRF/XRD) and X-ray microtomography (microCT) were performed on carbonate porous media samples treated with the acid systems in order to observe the effects of the fluid-rock interaction. The results showed that the acid nanoemulsion, presenting a low oil content formulation, showed the low surface tension and droplet size characteristic of nanoemulsions. It was experimentally verified that the reactivity in the nanoemulsion media was mass-transfer-retarded, and that the wormhole pattern was verified under the studied conditions.